Typical properties of PU matrix
| ||||||||||||||||
Materials preheat A-1001A: 50~60ºC2~4 preheated at 50~60ºC for 2~4 hours B-5301: 60~70ºC10~15 preheated at 60~70ºC for 10~15 hours | ||||||||||||||||
Typical processing parameters & Reaction parameter
0~90g/18kg The adding content of water should be 0~90g/18kg according to the reality 0~600g/18kg The adding content of water should be 0~600g/18kg according to the reality | ||||||||||||||||
Physical properties
| ||||||||||||||||
. Demold time may be prolonged with the increase of sole thickness | ||||||||||||||||
6mm These physical data are acquired by testing a sample of 6mm thick. |
Polyether Insole a-1005A/B-5305